blog about us events spotlight favorites

MEMBERS

Drea Jojo Princess Gianna Victoria Jenny Arica Lauren Michelle

 

Drill, Coin, Dremel, Ring
Friday, June 5, 2009 @ 12:22 PM

I have been making mass jewelry lately and came across a pretty quick and easy, do it yourself, at home ring project to share with you.

1. Find quarter from 1964 or earlier. These coins were 90% silver.

2. Tap the coin down to a smaller diameter while widening the edge. Hold the coin on its edge between your thumb and finger and tap it with a hammer against a hard surface for about fifteen minutes. Tapping too hard or rushing this process will cause the ring to be deformed.

3. Carefully drill a hole through the center. Using a Dremel tool, widen the hole and smooth out the the roughness.

4. Wedge it back onto a drill bit with some cloth for padding on the inside. Slowly spin the ring, this time on the polishing compound on a clean rag and it should be ready to wear.


How to Make A Ring Out of A Coin


Do It, To It!

<3 peace

G

G'sSpot





CHECK OUT OUR PREVIOUS POSTS!